|
Nortel Norstar Telephone Systems
|
|
Changing the time on a Norstar system must be done using a display phone.
Using a M7310 or T7316 the right 2 buttons under the display are "NEXT" and
"SHOW" respectively.
|
| 1.- |
To enter programming mode press "FEATURE" and "* * 2 6 6 3 4 4" |
| 2.- |
Enter password (default = 266344) - display should read "Terminals &
Sets" |
| 3.- |
Press "NEXT" 5 times - display should read "Time and Date" |
| 4.- |
Press "SHOW" - display should read "Hour:___" |
| 5.- |
Press softkey "CHANGE" |
| 6.- |
Enter hour - display should read "AM OK or Change" |
| 7.- |
Select AM or PM |
| 8.- |
Press "NEXT" - display should read "Minutes:___" |
| 9.- |
Press softkey "CHANGE" |
| 10.- |
Enter minutes |
| 11.- |
Press "NEXT" - display should read "Year:___" |
| 12.- |
Press softkey "CHANGE" |
| 13.- |
Enter year |
| 14.- |
Press "NEXT" - display should read "Month:___" |
| 15.- |
Press softkey "CHANGE" |
| 16.- |
Enter month |
| 17.- |
Press "NEXT" - display should read "Day:___" |
| 18.- |
Press softkey "CHANGE" |
| 19.- |
Enter day |
| 20.- |
Press "NEXT" |