|
Commander Vision
|
|
To Change the Date and Time |
| 1.- |
When entering into programming mode do not lift the receiver |
| 2.- |
From the Programming Station press the [P] Programming Key
|
| 3.- |
] until System Programming is displayed6Press the Scroll Down Key [
|
| 4.- |
Select System Programming (using grey menu key next to display)
|
| 5.- |
Enter the System Programming Password – 1111
|
| 6.- |
Select System (using grey menu key next to display) |
| 7.- |
Select Time and Date (using grey menu key next to display) |
| 8.- |
8. Enter the correct time in 24-hour format, (e.g. 1:30pm as 1330)
The display will prompt for date to be entered |
| 9.- |
Enter in the correct date in DDMMYY format, (e.g. 1 January 2001, 010101) |
| 10.- |
The display will now revert back to programming menu |
| 11.- |
Press [HANDSFREE] key to finish programming |